High Precision Rich Communication Interfaces Process Indicator
Controller
Product Description:
ID511 weighing controller is a high accuracy Process Control Indicator. This unit has a variety of field bus communication with high reliability which can fully meet complicated and harsh
requirements during industrial weighing control process.
Primary Applications
* Chemical and hazardous weighing purpose
* Batching control system
* Target setting control
Features:
* 5-step filter, high precision,high anti-vibration
* 3 housing modes: Panel,Harsh,Exd
* Harsh and Exd versions with seven bits 1” high green and red LED
display and 10 status lights.
* Panel mount with seven bits 0.56” high green and red LED display
and 10 status lights.
* Standard with two serial ports (RS232 and RS232/485), Kinds of
field-bus options to connect to PLC or DCS
* Report Weight and rate at the same time from
PROFIBUS-DP,MODBUS_RTU,
* 4-20mA, MODBUS-TCP
* 3 kinds PROFIBUS GSD inside
* UDP,TCP,MODBUS-TCP
* No-Testing Weight Calibration is available
* Zone:Zone 2, 22 and Div. 2 location
* Exd Class: EXD IIB T6
Options:
* 8 Inputs /12 Outputs (OC Type)
* 8 Inputs /12 Outputs (Relay Type)
* 4-20mA Output(16-bit DAC) x 1
* 4-20mA Output(16-bit DAC) x 2
* 100M LAN(TCP,UDP,MODBUS-TCP)
* POFIBUS DP for Siemens PLC
* PROFINET for Siemens PLC
* EtherNet/IP for Rockwall PLC
* CC-LINK for Mitsubishi PLC
Specifications:
| Accuracy |
| Accuracy Class | III |
| EU Approval | 150,000 Display Division ,CMC 6000e |
| Display & Keypad |
| Display | 7 bits 7-segment green or red LED display, Exd and Harsh:1”high display(25.4mm) Panel: 0.56” high display(14.2mm) |
| Update Speed | 50ms |
| Status Display | Tare,Net,Motion,Center of Zero,Kg/Lb,PLC online/offline |
| Six Function Keys | Zero,Tare,Clear,Memory,Unit Switch,Print |
| Power On/Off | None |
| Keypad Lock | Can be locked via local input or remote communication |
| ADC |
| Type | 24-bit |
| Speed | 200 Hz |
| Resolution | 0.06uV/d |
| Resolution Approved | 1uV/e(legal for trade) |
| Input | 0.1mV to 19Mv |
| Accuracy | 150,000d |
| Linearity and Stability |
| In-linearity & TC | ≤0.0015% FS；≤5ppm/℃ |
| Load Cell | |
| Exciting Voltage | 5V DC, max 150mA |
| Load Cell Number | Max 10 x 350Ω or 24 x 1100Ω |
| Connect Type | 4- wired or 6-wired , Cable:274mR/m2 |
| Scale Basic Functionality |
| Calibration | 2-point with testing weight or no testing(CalFree) |
| Filter | 5-step |
| Scale Process | Auto Print |
| Inputs | remote host(PLC or DCS) |
| Outputs | remote host(PLC or DCS) |
| Target Control |
| OVER/UNDER/OK | Support and other 8 comparators are available |
| Zero Tolerance | Support |
| Target Control | Simple Setpoint or Sequence Control(with Start & Abort command) |
| Communication I/F |
| Serial Port | 2 Ports: COM1-RS232,COM2-RS232/485,MODBUST-RTU, Continuous output
weight, Demand Input & Demand Output |
| PROFINET | Connect to Siemens PLC, report integer weight data and Floating
weight data |
| EtherNet/IP | Connect to Rockwall PLC, report integer weight data and Floating
weight data |
| MODBUS-RTU | Support, Integer & Floating weight data |
| 100M LAN Port | 100M,TCP,UDP,MODBUS-TCP |
| Analog Output | 4-20mA(16-bit DAC) x1 or 4-20mA(16-bit DAC) x2 |
| PROFIBUS-DP | Integer & Floating weight data,100Hz updating speed,3 GSD
inside,Totally compatible to PANTHER & IND131/331 |
| CC-LINK | for Mitsubishi PLC, Totally compatible to PANTHER & IND131/331 |
| Housing |
| Panel Mount | IP65,0.56” display |
| Harsh | IP69K, 1”display |
| Exd | IP65, 1”display,Exd ib[ia II C Ga] IIB T6 Gb/DIP A21 TA,T6 |
| DIN Rail | |
| Power Supply | 86~264VAC |
| Working Condition |
| Temperature | -10℃~40℃ ,95％ RH |
| Power Supply | 86~264VAC,12W |
Production:
